Supported devices

On this page, an overview of the supported devices of NoldusHub can be found. The following type of devices are discussed:

• Eye trackers

• Biosensors

• Webcams

Eye trackers

The following eye trackers that are currently on the market are supported in NoldusHub.

Tobii Pro

• Spark - 60 Hz.
• Fusion - 30 Hz, 60 Hz, 120 Hz, 250 Hz.
• Spectrum - 60 Hz, 120 Hz, 150 Hz, 300 Hz, 600 Hz or 1200 Hz. NoldusHub supports 60 Hz setting.
  

The following eye trackers are discontinued by their manufacturer but are still supported in NoldusHub (up to 60 Hz)

Tobii Pro

• Nano - 60 Hz.
• X2-30
• X2-60
• X60
• X120
• T60
• T120

Eyetech

• VT3-mini - 40 Hz, 120 Hz. Firmware version 2019.2.3.0_19.11.22.72. NoldusHub supports 40Hz and 120Hz setting.

Biosensors

The following biosensors currently on the market are supported in NoldusHub.

Shimmer

• Shimmer3 ECG unit for the signals: 
  • Raw ECG Lead I (referenced to Lead Neutral)
  • Raw ECG Lead II (referenced to Lead Neutral)
  • Raw ECG Lead III (referenced to Lead Neutral)
  • Raw ECG Lead IV (referenced to Lead Neutral)
  • Heart rate (calculated from the ECG Lead II signal)
  • Interbeat intervals (calculated from the ECG Lead II signal)
• Shimmer3 GSR+ unit for the signals:
  • Raw PPG
  • Heart rate (calculated from the raw PPG signal)
  • Interbeat intervals
  • Tonic skin conductance
  • Skin conductance peak rate

Shimmer biosensors require correct configuration during the installation of the NoldusHub participant stations. Problems with one or all signals from your Shimmer device may be caused by misconfiguration (e.g. sampling frequency settings and signal selections on the device). Your system administrator can check that configuration using the NoldusHub installation documententation for Shimmer devices. 

Webcams

Logitech

• Brio webcam, VGA resolution.