Skip to main content

Set up devices and test stations for a project

Aim

To set up measurement devices and test stations.

Before you begin

  • The devices and test stations functionality depends on your user role:
    • As an Administrator you can set up devices and test stations for any project.
    • As a Researcher you can set up devices and test stations for projects you created yourself and for projects shared with you as a member.
    • As a User you can set up devices and test stations for projects shared with you as a member.
  • Navigate to the project for which you want to set up the devices and test stations.

Note

Devices and signals are logically connected

A device and its signals are logically connected in NoldusHub. When you switch off a device, all its connected signals are also automatically switched off. And vice versa, when you switch off all signals for a device, the device itself is also switched off.

The same applies to switching on: When you switch on a device, all its signals are also switched on.

So, for example, when you switch off an Eye tracker device, the Gaze signal is automatically switched off. Or the other way around: When you switch on a Screen video device, the Screen video signal is also switched on.

Procedure

  1. If you want to set up a test stations other than the first, click image-1656577249873.png on the appropriate test stations to collapse its details.  
  2. Switch on or switch off the signals and devices toggles to select or unselect them for your project. For example, switch on the Gaze signal and switch off the Screen video signal:
    image.png

What's next?

You can calibrate an eye tracker for your project or jump right in to record a session.

No Comments
Back to top