Skip to main content

Select devices that do not support ONVIF in MediaRecorder

Aim

To select a device that does not support ONVIF Profile S in MediaRecorder.

If your device does support ONVIF, see Select ONVIF cameras in MediaRecorder instead.

Prerequisites

  • Your device does not support ONVIF Profile S
  • You followed the procedure in Ethernet card setup
  • You created comparable settings for you device as described in Camera setup
  • You installed MediaRecorder


See Installation

  • You connected your video device to the computer with MediaRecorder.

Procedure

  1. Open MediaRecorder and choose File > Video settings or click Video settings.settings.

    image.png

  2. Select the checkbox in front of the video channel and choose RTSP IP Camera (Noldus RTSP Source Filter).

    image.png

  3. Click the Advanced Video Settings button.

    image.png

  4. A list with available ONVIF cameras in the network appears.

  5. important  Your device that does not support ONVIF is not in this list. Click Cancel.

    image.png

  6. Enter the IP address,address, User name and Password of the device. If you bought your device from Noldus IT, the User name is root and the Password is Noldus.
  7. Noldus.
    If the default Port 554 is already in use, ask your system administrator for help to select another one.
  8. Click Get device properties.properties.

    image.png

  9. The field Connection string appears.

    image.png

  10. Look up in the manual of your device where the video files can be accessed via the RTSP communication protocol. Enter the path from the slash after the connection information in the Connection string field. For example,
    /stream.sdp for an Epiphan VGADVI broadcaster.   

    image.png

  11. Click OK.OK. Optionally, select another frame rate or resolution. However, make sure you select the same frame rate as is selected in the device itself when you opened the camera in a browser (see the next step).
  12. Optionally, open the camera in a browser to pan, tilt, or zoom.


See Access camera settings

important  Close the browser before starting recording with MediaRecorder.

  1. Click OK and continue with Record video
Back to top