Introduction
MediaRecorder is a software package that makes digital video files with input of many different types of cameras. These video files can be used in the video analysis programs The Observer XT, EthoVision XT and FaceReader.
Supported video devices
MediaRecorder is supported with several types of video devices. In the section on the type of device, you find which specific devices are tested and supported, how many devices you can use simultaneously, at what frame rate and resolution and in which Noldus software.
MediaRecorder is supported with the following devices types. See the section on the device type which specific video device has been tested.
- Analog cameras
- IP cameras
- USB devices
can be connected to the computer without an amplifier with a cable of 5 m. For every subsequent 5 m an amplifier must be used. In theory, when using a standard resolution, the cables could be extended this way to 30 m. However we know that not all devices support this. USB cameras - The DanioVision FireWire system
- GigE Vision cameras
- Screen capture devices
We recommend to create a test recording with your devices first before you carry out the actual recordings, especially when you have more or other devices than we officially support.
See Record video
Modules
MediaRecorder has the following modules.
- Base Module – To record up to four video files simultaneously. However this number depends on the type of video device, since multiple cameras are not supported for all devices. See the section on your device how many devices are supported at what frame rate and resolution.
- Additional Camera Module 1-6 camera – For analog, or IP cameras only. To extend the number of cameras to 6.
- Additional Camera Module 1-8 cameras – For IP cameras only. To extend the number of cameras to 8.
MR Screen Capture Module – To create a video recording of the monitor of the computer with MediaRecorder.
Standalone or with other software
MediaRecorder can be used as a standalone program to create video files. It is also possible to use the Noldus network communication protocol N-Linx, to use it in combination with The Observer XT. This way, recording with MediaRecorder starts automatically when starting an observation in The Observer XT and stops when this observation is ended. Furthermore, the videos obtained this way are automatically linked to an observation and synchronized with the manually scored events.
It is also possible to control recording with commands from EthoVision XT, for example to start recording when a mouse leaves the shelter.
MediaRecorder Help
This Help describes how to use MediaRecorder 6.5 with the supported recording devices. Information about devices from companies other than Noldus IT is valid at the moment of the release and may change afterwards without our knowledge.
If you have any problems, questions, remarks or comments, please let us know.
See Technical support in Troubleshooting for contact information.