Create audio settings

Aim

To optimize the recording volume.

Prerequisites

• You have Axis IP cameras that are supported with MediaRecorder.
  See Supported IP cameras in  in Recording devices
• You followed the procedure in in Ethernet card setup
• You connected all cameras.
• You gave the cameras an IP address.
  See Set camera IP address

• You gave the camera a password and selected the correct power line frequency.
  See Set camera password and select power line frequency

• You followed the procedure in in Create camera settings

Procedure

1. Open the camera settings,
   See See Access camera settings
2. Open the the Audio  tab.
3. Adjust the Gain slider and check in the Input section that the green field in the Level field is maximal with normal speech.    

Note

You cannot record the audio of non-ONVIF devices in MediaRecorder. Optionally record audio from a separate microphone that is connected to the microphone input of the computer with MediaRecorder. The Axis cameras supported with MediaRecorder support ONVIF.