Skip to main content

Configure the Basler USB 3 camera

Aim

To adjust settings in the USB 3 camera, like the video frame rate, resolution, and exposure.

note  The camera settings are stored in the camera itself, not on the PC. When you work with multiple cameras, repeat the procedure for each camera.

Procedure

  1. Make sure MediaRecorder (and EthoVision XT, when present on the computer) are not running.
  2. Start the Basler Pylon Viewer software that comes with the USB 3 camera.image.png
    1. note  The Basler Pylon Viewer software is installed automatically when you install the camera drivers.
  3. Choose Tools > Options and set the User level to Expert or Guru.
  4. In the Devices panel, under USB, double-click the Basler camera.

    image.png

  5. Under Features, open the item Basler acA1920-155um and choose the settings you would like to change. For details, see the corresponding settings in Configure the cameras in Set up GigE cameras.
  6. Save the settings under User Set Control.

See also

Back to top