The steps to install IP cameras

Prerequisites

Which situation applies to you?

Procedure

  1. Install the Ethernet card
  2. Set Ethernet card IP address
  3. Connect IP cameras to the PC
  4. Set camera IP address
  5. Set camera password and select power line frequency
  6. Create camera settings
  7. Create audio settings
  8. Select ONVIF cameras in MediaRecorder 
  9. or
  10. Select devices that do not support ONVIF in MediaRecorder

Notes


Revision #5
Created 1 December 2023 09:29:26
Updated 20 December 2023 13:47:08